0
WORK JACKET
$20.00
- Sizes XS–XXL
- Advanced
- A0, US Letter and A4 Print Files
- Construction Workflow Included
- Instant PDF Download
Description
Chest and hip welt pockets, buttoned sleeve tabs, a wind flap behind the zip and a full lining. Twenty-four pieces, all at 1 cm.
Pattern specification
- Size range
- XS–XXL
- Skill level
- Advanced
- Recommended fabric
- 10–14 oz cotton duck or canvas for the outer; blanket, flannel or quilted cotton for the lining
- Colours shown
- Black cotton duck with brass hardware
- Yardage
- 3 1/4 yd outer at 60 in (3 5/8 yd for L–XXL), plus 2 1/4 yd lining and 1/2 yd pocketing
- Notions required
- One metal separating zip, 26 in, shortened from the top; two 18–20 mm buttons or snaps; a 100/16 jeans needle
- Stretch required
- None. Woven throughout
- Seam allowance
- 1 cm throughout
- Format
- PDF. Print at home or copy shop
Size chart
| Size | Chest | Length | Sleeve |
|---|---|---|---|
| XS | 20.6 / 52.2 | 26.8 / 68.0 | 25.5 / 64.8 |
| S | 21.6 / 54.8 | 27.2 / 69.0 | 25.8 / 65.5 |
| M | 22.5 / 57.2 | 27.6 / 70.0 | 26.1 / 66.3 |
| L | 23.5 / 59.8 | 28.0 / 71.0 | 26.4 / 67.1 |
| XL | 24.5 / 62.2 | 28.3 / 72.0 | 26.7 / 67.8 |
| XXL | 25.5 / 64.8 | 28.7 / 73.0 | 27.0 / 68.6 |
Finished garment, measured flat. Chest is half the all-round measurement, so double it to compare against a jacket you already own. Length is nape to hem, sleeve is shoulder to cuff. These are the jacket's measurements and not your body's. Pick the size that leaves 5 1/2 to 8 in of room over your chest, and go up if you want a hoodie underneath. Inches / centimetres.
Before you cut
Before you cut. Twenty-four pieces, all at 1 cm. Back Top and Back Lining are cut on the fold; the fronts, facings and every sleeve piece are mirrored pairs. The chest welt pocket is on the left front only. On M and above the Waist Hem Panel runs longer than the sheet and its last section prints at the top of sheet 3, so tape the two parts together end to end before you cut it.
Key details
- Chest welt pocket, left front
- Angled welted hip pockets
- Two inside pockets in the lining
- Buttoned sleeve tabs
- Wind flap behind the zip
- One-piece waist band, right round
- Fully lined and bagged out
Pattern pieces
- Outer: Front Top, Back Top, Front Facing, Collar, Waist Hem Panel, Zipper Protector, Sleeve Front Top, Sleeve Back Top, Sleeve Hem Panel, Back Sleeve Hem Panel, Sleeve Belt, Chest Pocket Lips, Top Hip Pocket Lips, Inside Right Pocket Lips
- Lining: Front Lining Right, Front Lining Left, Back Lining, Sleeve Front Lining, Sleeve Back Lining
- Pocketing: Chest Pocket Bag, Top Hip Pocket Bag 1, Top Hip Pocket Bag 2, Inside Left Pocket, Inside Right Pocket
In the download
- A0 copy-shop file, 3p
- US Letter / A4 print file, 72p
- Construction workflow, 9p
Licensed for personal use only. Files may not be resold, redistributed, shared or used for commercial production without written permission from Kissing Parasites.